An IoT based smart programmed multi cropping water system control gadget has been intended to encourage the automatic water supply of adequate water from a sump or well to field or multi cropping crops in all agricultural season. One of the main objective of this project is to avoid manpower for every irrigation purposes with proper interval based on multi cropping system. The technique utilized is to consistently monitor the real time gap and crop duration, fertilizer duration for feed to cropping system. And also how much water is required for each different kind of crops in multi cropping system. The pump motor will operate based on the microcontroller system output. The different valve system will operate by proper relay driver system for dripping the individual cropping system. The exclusive android application will help and monitor the real scenario for dripping system. The application is running based on the customer input data, once owner feed the data will stored in cloud and the microcontroller will get the data from cloud and control the valve systems. The manual setting system also included in this gadget. The arduino board is specially designed circuit board for programming and prototyping with ATMEL microcontroller. The microcontroller used in this arduino is ATmega 328 which is in-built in arduino board and the coding are done in embedded C.